Honda INTERCEPTOR 2002 Service Manual page 385

CRANKSHAFT / PISTON/ CYLINDER
12-14
Measure the O.D. of the piston pin.
SERVICE LIMIT: 16.98 mm (0.669 in)
Calculate t he piston-to-piston pin clearance.
SERVICE LIMIT: 0.04 mm (0.002 in)
CONNECTING ROD INSPECTION
Measure the connecting rod small
end I.D.
SERVICE LIMIT: 17.04 mm (0.671 in)
CONNECTING ROD SELECTION
The weight code stamped on t he connecting rod
using an alphabetical code.
The replacement connecting rod is available only
weight code B. If the original connecting rod weight
code is either
A
or
C,
you can use weight code
B
connecting rod.
CYLINDER INSPECTION
Inspect the top of the cylinder for warpage.
SERVICE LIMIT: 0.10
mm
(0.004 in)
WEIGHT CODE