Honda INTERCEPTOR 2002 Service Manual page 361

CRANKCASE/ TRANSMISSION
Loosen the six 6 mm bolts and five 10 mm bolts i n a
crisscross pattern in 2 or 3 steps.
Remove the bolts and seali ng washer.
Remove the lower crankcase 6 mm bolts and 7 mm
bolts.
Loosen the mai n journal 9 mm bolts in a crisscross
pattern in
2
or
3
steps, then remove and discard the
9 mm bolts.
Separate the lower crankcase from the upper crank-
case.
Remove the following:
- Swingarm pivot collars
- Dowel pins
VTEC oil pass collar
Oil orifices
Transmission oil jets
Mainshaft oil seal
TRANSMISSION
REMOVALIDISASSEMBL Y
11-6
Separate the crankcase halves (page 11-5).
Remove the mainshaft and countershaft assemblies
from the upper crankcase.
., 9
6 mm BOLTS
9mm
BOLTS
OIL PASS COLLAR OIL ORFICES
~ GJ~
~ ~
.
.
OIL JETS