Honda INTERCEPTOR 2002 Service Manual page 257

ENGINE REMOVAL/INSTALLATION
Support the engine using a jack or other adjustable
suppo rt to ease engine hanger bolt removal.
Remove the following:
- Rear engine hanger bolts, washer and d istance
collar
- Middle engine hanger socket bolt, washer and
distance collar
- Front engine hanger nut, washer, bolt and dis-
tance collar
Carefully lower the adjustable support, then remove
the engine from the frame.
ENGINE INSTALLATION
7-10
• Note the direction of the hanger bolts.
• The jack height must be continually adjusted to
relieve stress from the mounting fasteners.
Install the engine into the frame.
Install the following:
- Front engine hanger bolt, distance collar, washer
and nut
Middle engine hanger distance collar, washer
and bolts
- Rear engine hanger distance collar, washer and
bolt
Tighten the front engine hanger nut to the specified
torque.
TORQUE: 54 N·m (5.5 kgf·m, 40 lbf·ft)
Tighten the right side middle and rear engine
hanger flange bolts to the specified torque.
TORQUE: 44 N·m (4.5 kgf·m, 33 lbf·ft)
Tighten the left side middle and rear engine hanger
bolts to the specified torque.
TORQUE: 44 N·m (4.5 kgf·m, 33 lbf·ft)