Honda INTERCEPTOR 2002 Service Manual page 459

REAR WHEEL/SUSPENSION
Install the suspension linkage (page 14-24).
Install and tighten the lower mounting bolts/nuts to
the specified torque.
TORQUE: 42 N·m (4.3 kgf·m, 31 lbf·ft)
Instal l and tighten the fuel tank mounting bolts.
A BS rype only
Route the pre-load adjuster hose into the frame
(page 1-25).
Install the spring and lock ball into the pre-load
adjuster body.
Be
careful not to
Install the pre-load adjuster knob while pushing the
lose the locking ball
lock ball.
and sprmg
14-30
Install and tighten the pre-load adjuster knob screw.
Install the pre-load adjuster cover and tighten the
screw.