Radiator - Honda INTERCEPTOR 2002 Service Manual

Tighten the water hose clamp screws securely.
Connect the bypass hose to the water pump cover,
then tighten the clamp screw.
Fill the system with the recommended coolant and
bleed the air (page 6-6).
Install the t hrottle body (page 5-67).
RADIATOR
REMOVAL
Remove the side cowl and inner half cowl (page 2- .........
~~--...,."'P"'::~~
8).
Drain the coolant (page 6-6).
Loosen the filler neck joint hose and radiator joint
hose clamps. Disconnect the filler neck joint hose,
upper and lower radiator joint hoses.
Disconnect the air bleed hose.
Remove the bolt and radiator lower bracket.
Remove the mounting bolt and col
lar, t hen remove
the right radiator from the frame.
Disconnect the radiator sub-harness 2P (Black) con-
nector.
COOLING SYSTEM
6-13