Honda INTERCEPTOR 2002 Service Manual page 278

Make sure that the index lines on the rear cam
sprocket are facing outward and that the No.3 pis-
ton is at TDC (Top Dead Center) on the compression
stroke.
It
1S
not necessary
If you plan to replace the camshaft and/or cam
to remove the cam
sprocket, remove the cam sprocket bolts and cam
sprocket from the
pulse generator rotor bolts as follows:
camshaft except
when replacing the
camshaft and/or
cam sprocket.
Be careful not to -
Remove the cam sprocket bolts f rom intake and
drop the cam
exhaust camshafts.
sprocket bolts mto
the crankcase.
- Turn the crankshaft one full turn (360°), remove
the other cam sprocket bolts from the camshafts.
CYLINDER HEAD/ VALVES
8-15