Honda INTERCEPTOR 2002 Service Manual page 208

FUEl SYSTEM (Programmed Fuel Injection)
Turn each starter valv e adjusting screw in, counting
number of turns until it seats lightly.
Record the number of turns.
Loosen t he each lock nut and remove the each
starter valve.
Do nor apply com-
Clean the starter valve bypass using compressed
mercially available
air.
carbureror cleaners
to the inside of the
throttle bore, which
ts coated with
molybdenum.
ASSEMBLY
1 N·m (0.09 kgf·m, 0.7 1 bf·ft)
FUEL RAIL
5 N·m (0.5 kgf·m, 3.6 lbf·ft)
STARTER VALVE
FUEL RAIL JOINT PIPE
~
2 N·m (0.18 kgf·m, 1.3 1 bf·ft)
PRESSURE REGULATOR
5-73