Proportional Control Valve - Honda INTERCEPTOR 2002 Service Manual

Install the brake hose with the oil bolt and new seal-
ing washers.
Push the eyelet joint against the stopper, then
tighten the oil bolt to the specified torque.
TORQUE: 34 N·m (3.5 kgf ·m, 25 lbf.ft)
Fill and bleed the brake system (page 15-7).
PROPORTIONAL CONTROL VALVE
REAR PROPORTIONAL CONTROL
VALVE REMOVAL/INSTALLATION
HYDRAULIC BRAKE
•
Drain the pedal and servo line hydraulic system ...
m.-;:-;::-..; ,..~~~~~; .... ,...
(page 15-7).
Remove the rear fender (page 2-17).
Remove the heat guard mounting bolt.
Remove the right footpeg holder mounting bolts
and right footpeg holder assembly.
Disconnect the rear brake light switch and rear
wheel speed sensor wire connectors.
Remove the oil pipe joint from the hose joint.
Remove the brake oil hose joint mounting bolt.
15-33