Honda INTERCEPTOR 2002 Service Manual page 413

FRONT WHEEl/ SUSPENSION/ STEERING
Brake Caliper Pivot Bearing Replacement
Remove the dust seals and pivot collar.
Press out the pivot bearings using the special tool.
TOOL:
Needle bearing remover
07946-KA50000
Apply grease to the pivot bearing.
Install the bearing
Press the needle bearing into the fork slide r using
so
that the bearing
the same tool.
cage
is
5.5
mm
(0.22 in) from the
pivot surface.
13-24
Apply grease to the new dust seal lips.
Install the dust seal and pivot collar.
PIVOT COLLAR
-
NEEDLE BEARING REMOVER
5.5 m m (0.22 in)
1r
H
PIVOT COLLAR