Installation - Honda INTERCEPTOR 2002 Service Manual

CLUTCH
9-24
DISASSEMBLY I ASSEBML Y
Remove the snap ring and primary drive sub-gear.
Inspect the spri ng for fatigue or other damage,
replace if necessary.
Install t he springs i nt o the primary drive gear
g rooves.
Install the sub-gear by al igning the holes.
Install the snap ring securely into the groove.
INSTALLATION
Install the primary drive gear by aligning its wide
groove with the wide teeth on the crankshah.
Install the primary drive gear while aligning t he sub-
gear teeth with the primary drive gear teet h with a
screwdriver.
SUB-GEAR
SNAP RING
SPRINGS
SUB-GEAR
SNAP RING