Honda INTERCEPTOR 2002 Service Manual page 466

Install the drive chain slider bosses into the hole in
the swingarm.
Install and tighten the new drive chain slider flange
bolts to the specified torque.
TORQUE: 9 N·m (0.9 kgf·m, 6.5 lbf.ft)
INSTALLATION
REAR WHEEL/ SUSPENSION
DRIVE CHAIN SLIDER
Install the swingarm onto the engine and suspen- C"'~---­
sion bracket.
Apply thin coat of grease to the swingarm pivot bolt
surface.
Install the swingarm pivot bolt from the left side.
Install and tighten the swingarm pivot nut to the
specified torque.
TORQUE: 93 N·m (9.5 kgf·m, 69 lbf·ft)
14-37