Honda INTERCEPTOR 2002 Service Manual page 537

ANTI-LOCK BRAKE SYSTEM (ABS)
16-22
5. Crank Angle Sensor Short Circuit Inspection at
Modulator Connector
Disconnect the front ABS modulator 3P (Light
gray) connector.
Check for continu ity between the front ABS
modulator 3P (Light gray) connector and
ground.
Connection: White/ pink - ground
Is there continuity?
NO - Open circuit in wire harness between
the front ABS modulator and the ABS
control unit.
YES - GO TO STEP 7.
6. Wire Harness Conti nuity Inspection
Disconnect the fro nt ABS modulato r 3P (Light
gray) connector.
Check for continuity between the ABS control
unit 12P (Black) connector and front modulator
3P (Light gray) connector.
Connection: White/ pink - White/ pink
Is there continuity?
NO - Open circuit in wire harness between
the rear ABS modulator and the A BS
cont rol unit.
YES -GO TO STEP 7.
7. Modulator Inspection by Replacing the Front
and Rear Modulators
Connect the ABS control unit 5P (Black) connec-
tor.
Remove t he front and rear modulators and inter-
change them.
Connect the rear modulator 3P (Gray) and 2P
connectors to the rear modulator.
Connect t he front modu lat or 3P (Gray) and 2P
connectors to the front modulator.
Perform the pre-start self-diagnosis, retrieve the
problem code and record it.
Is any problem code indicated?
6 blinks- Faulty rear A BS modulator.
7 blinks-faulty ABS control unit.