Honda INTERCEPTOR 2002 Service Manual page 267

CYLINDER HEAD/ VALVES
VALVE TIMING/CYLINDER NUMBER
TORQUE VALUES
Cylinder head flange bolt
Cylinder head orifice bolt
Camshaft holder flange bolt
Cylinder head cover bolt
Breather plate flange bolt
PAIR check reed valve cover SH bolt
Cam sprocket UBS bolt
Cam chain tensioner flange bolt
Cam chain guide flange bolt
Cylinder head stud bolt (exhaust pipe
stud bolt)
Ignition pulse generator rotor/primary
drive gear flange special bolt
Spark plug
ECT (Engine Coolant Temperature/
thermo sensor
TOOLS
Compression gauge attachment
Valve spring compressor
Valve spring compressor attachment
Valve spring compressor attachment
Tensioner holder B
Tappet hole
protector
Valve guide driver
Valve guide reamer, 4.5 mm
Valve seat cutters
Seat cutter, 27.5 mm (45° EX)
Seat cutter, 29 mm (45° IN)
Flat cutter, 28 mm (32° EX)
Flat cutter, 30 mm (32° IN)
Interior cutter, 30 mm (60° IN/EX)
Cutter holder, 4.5 mm
8-4
44 N·m (4.5 kgf·m, 33 lbf·ft)
8 N·m (0.8 kgf·m, 6 lbf·ft)
12 N·m (1.2 kgf·m, 9 lbf·ft)
10 N·m (1.0 kg f·m, 7 lbf ·ft)
12 N·m (1.2 kgf·m, 9 lbf·ft)
12 N·m (1.2 kgf·m, 9 lbf·ft)
20 N·m (2.0 kgf·m, 14 lbf·ft)
26 N·m (2.7 kgf·m, 20 lbf·ft)
12 N·m (1.2 kgf·m, 9 lbf.ft)
See page 1-15
103 N·m (10.5 kgf·m, 76
lbf·ftl
12 N·m (1.2 kgf·m, 9 lbf·ft)
23 N·m (2.3 kgf·m, 17 lbf·ft)
07RMJ-MY50100
07757-0010000
07959-KM30101
070ME-MCW0100
07ZMG-MCAA400
07HMG-MR70002
07H M D-ML00101
07HMH-ML00101
07780-0010200
07780-0010300
07780-0012100
07780-0012200
07780-0014000
07781-0010600
Apply o il to t he threads and f lange su r-
face
Apply oil to the threads and flange sur-
face
Apply a locking agent to the threads
CT bolt
CT bolt
Apply a locking agent to the threads
Apply a locking agent to the threads
Apply a locking agent to the threads
Apply o il to t he threads and flange su r-
face
Equivalent commercially available in
U.S.A.
-these are commercially available in
U.S.A.