Honda INTERCEPTOR 2002 Service Manual page 296

CYLINDER HEAD/ VALVES
Grease the corcers
Install the valve cotters using the special tool as
co ease insrallat10n.
shown.
I
NOTICE
To prevent loss of tension, d o not compress the
valve spring more than necessary.
TOOLS:
Valve spring compressor
Valve spring compressor
attachment
07757-0010000
07959-KM30101
Support the cylm-
Tap the normal side valve stems gently with two
der head above che
plastic hammers as shown to seat the cotters firmly.
work bench sur-
face to prevent pos-
sible valve damage.
lubricate the VTEC side valve stems with molybde-
num oil solution. SPRING SEAT
Insert the valve into the valve guide while turning it STEM SEAL
slowly to avoid damage to the stem seal.
Install the VTEC side inner valve spring with the
t ightly wound coils facing the combustion chamber.
Install the valve spring retainer.
RETAINER INNER VALVE SPRING
COMBUSTION CHAMBER SIDE
8-33