Honda INTERCEPTOR 2002 Service Manual page 333

CLUTCH
9-16
Unstake the clutch center lock nut.
Hold the clutch center with the clutch center holder,
then loosen and remove the lock nut.
TOOL:
Clutch center holder
Discard the lock nut.
07724-0050002
(Equivalent commer-
cially available in
U.S.A.)
Remove the lock washer and clutch center.
Remove the starter clutch assembly (page 9-11 ).
Align the primary drive gear and sub-gear teeth
with a screwdriver, then remove the needle bearing
and clutch outer.
Remove the oil pump driven sprocket boiUwasher.