Honda INTERCEPTOR 2002 Service Manual page 400

FRONT WHEEL/ SUSPENSION/STEERING
Tighten the forward screw first, then the rear screw.
Install the master cylinder by aligning the end of the
master cylinder with the punch mark on the handle-
bar.
Install the master cylinder holder w ith the "UP"
mark facing up.
Tighten the upper bolt first, the lower bolt.
Connect the brake switch w ire connectors.
Install the handlebar weight and tighten the new
mounting screw to the specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf.ft)
FRONT WHEEL
REMOVAL
Support the motorcycle securely using a safety
stand or a hoist.
Remove the bolts, reflectors and front fender.
SWITCH HOUSING
SCREWS
MASTER CYLINDER
HOLDER
BOLTS
. .
~
.... ,.. SCREW
FRONT FENDER
BOLTS
13-11