Honda INTERCEPTOR 2002 Service Manual page 161

FUEL SYSTEM (Program med Fuel Injection )
5-26
4. No.1 Injector Power Input Line Inspection
Turn the ignition switch ON.
Measure the voltage between the No. 1 injector
connector of the wire harness side and ground.
Connection: Black/ white (+)- Ground (-)
Standard: Battery voltage
Does battery voltage exist ?
No - Open or short ci rcuit in Black/white
wire.
YES - GO TO STEP 5.
5. No.1 Injecto r Resistance Inspection at ECM
Turn the ignition switch OFF.
Connect the No. 1 i njector connecto r.
Disconnect the ECM connectors.
Connect the test harness to the wire harness
connectors.
Measure the resistance at the test harness termi-
nals.
Connection: A24 (-) - B12 (+)
Standard : 9- 15
n
(20 °C/ 68 °F)
Is the resistance within 9 - 15
n
(20 °C/ 68 °F}?
NO - Open or short circuit in Black/white and/
or Pink/blue wire.
YES - GO TO STEP 6.
6. No.1 Injector Control Line Short Circuit Inspec-
tion
Check fo r continuity between t he test harness
terminal and ground.
Connection: A24
(+) -
Gro und (- )
Is there continuity?
YES - Short circu it in Pink/blue w ire.
NO - Replace t he ECM with a new one, and
inspect it again.
No.1 INJ ECTOR 2P CONNECTOR
\
~,('
~~
CJ
0
ECM