Honda INTERCEPTOR 2002 Service Manual page 407

FRONT WHEEL/SUSPENSION/ STEERING
FORK
13-18
Tighten the left axle pinch bolts to the specified _
rnw .J~::a:ll~r::
torque.
TORQUE: 22 N·m (2.2 kgf·m, 16lbf.ft)
Check the clearance between the brake disc and cal- ,.----- - - -- - - - - - -- - ----,
iper bracket on each side after installation.
The clearance should be at least 0.7 mm (0.03 in).
REMOVAL
Remove the following:
- Remove the front wheel (page 13-11)
- Handlebars (page 13-5).
For the left fork leg removal, remove the following:
- Left brake caliper pivot bolt
- Left brake caliper bolt (second master joint)
Support the left brake caliper with a piece of wire so
that it does not hang from the brake hoses. Do not
twist the brake hose.
For the right fork leg remova l, remove the bolt and
brake hose 3-way joint mounting bolt.
PIVOT BOLT
LEFT BRAKE
CALIPER
~