Cylinder Head Cover Assembly - Honda INTERCEPTOR 2002 Service Manual

CYLINDER HEAD/ VALVES
CYLINDER HEAD COVER ASSEMBLY
8-48
Install the new gasket and crankcase breather plate
to t he rear cylinder head cover.
Apply a locking agent to the crankcase breather
plate f lange bolt threads.
Tighten the bolts to the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Install the PAIR check reed valves into the cylinder
head cover.
Install the PAIR reed valve covers and tighten the
SH bolts to the specified torque.
TORQUE: 12 N ·m (1.2 kgf·m, 9 lbf·ft)