Honda INTERCEPTOR 2002 Service Manual page 364

Mainshaft bearing replacement
Press out the mainshaft from the bearing using a
hydraulic press.
CRANKCASE/TRANSMISSION
MAINSHAFT
Instal/with rhe
Install a new mainshaft bearing onto the mainshaft
~=================~
groove side facing
by pressing the main shaft bearing inner race using
up.
t he special tools.
TOOLS:
Inner driver C
Attachment, 25 mm J.D.
07746-0030100
07746-0030200
Check the shift fork guide pin for abnormal wear or
damage
Measure the shift fork I.D.
SERVICE LIMIT: 14.03 mm (0.552 in)
Measure the shift fork claw thickness.
SERVICE LIMIT: 6.40 mm (0.252 in)
Measure the shift fork shaft 0.0.
SERVICE LIMIT: 13.965 m m (0.5498 in)
ATTACHMENT
BEARING
t
11-9