Honda INTERCEPTOR 2002 Service Manual page 588

ELECTRIC STARTER/ STARTER CLUTCH
DISASSEMBLY
Remove the starter driven gear while rotating it
clockwise.
Remove the needle bearing.
Remove the snap ring.
Remove the one-way clutch f rom the clutch outer by
turning it counterclockwise.
Check the starter driven gear and needle bearing for
abnormal wear or damage.
Measure the starter drive gear boss O.D.
SERVICE LIMIT: 45.64
mm
(1.797
in)
Check the one-way clutch roller for freedom of
movement.
Check the rollers and cage for wear or damage,
replace if necessary.
DRIVEN GEAR
SNAP RING
ONE-WAY CLUTCH
CAGE
ROLLER
19-13