Honda INTERCEPTOR 2002 Service Manual page 247

COOLING SYSTEM
6-20
Connect the water hose to the water pump body
and tighten the clamp screw.
A lign the mounting bolt holes in the water pump
and crankcase and make sure the water pump is
securely installed.
Install a new 0-ring into the groove in the water
pump body.
~~~~~~=~====
Install the water pump cover.
Install the two SH bolts and two flange bolts.
Tighten the flange bolts to the specified torque.
TORQUE: 13 N·m (1.3 kgf·m, 9 lbf·ft)
Tighten the two SH bolts.
Connect the lower radiator hose and bypass hose,
then tighten the clamp screws.
Fill the system with recommended coolant (page 6-
6) .
~~~~i
Install the side cowl (page
2-10).
~