Fuel Level Sensor - Honda INTERCEPTOR 2002 Service Manual

REM OVAL/INSTALLATION
Remove the boot, termina l screw and wire terminal
(page 20-18).
Remove the oil pressure switch from the crankcase.
Apply sealant to the oil pressure switch threads as
shown.
Insta ll the oil pressure switch onto the crankcase,
tighten it to t he specified torque.
TORQUE: 12 N ·m (1.2 kgf·m, 9 lbf.ft)
Connect the oil pressure switch terminal to the
switch and tighten the screw.
Install the dust cover.
FUEl lEVEl SENSOR
REMOVAL
Open and support the fue l tank using the equipped
tools (page 3-5).
Disconnect the f uel reserve sensor 2P (Blue) con-
nector.
Remove the fuel tank without disconnecting the fuel
li nes (page 8-6).
Be careful not to
Remove the nuts, wire clamp and fuel level sensor
damage the float
unit f rom the fuel tank.
arm.
...
LIGHTS/ METERS/ SWITCHES
Do not apply sealant to the thread
head 3-4 mm (0.1 - 0.2 in).
•
20-19