Honda INTERCEPTOR 2002 Service Manual page 534

5. Crank Angle Sensor Short Circuit Inspection at
Modulator Connector
Disconnect the front ABS modulator 3P (Light
gray) connector.
Check for continuity between the front ABS
modulator 3P (Light gray) connector and
ground.
Connection: White/pink -ground
Is there continuity?
NO - Open circuit in wire harness between
the front ABS modulator and the ABS
control unit.
YES - GO TO STEP 7.
6. Wire Harness Continuity Inspection
Disconnect t he front ABS modulator 3P (Light
gray) connector.
Check for continuity between the ABS control
unit 12P (Black) connector and front modulator
3P (Light gray) connector.
Connection: White/ pink- White/ pink
Is there continuity?
NO - Open circuit in wire harness between
the front ABS modu lator and the ABS
control u nit.
YES - GO TO STEP 7.
7. Modulator Inspection by Replacing the Front
and Rear Modulators
Connect the ABS control unit 5P (Black) connec-
tor.
Remove the front and rear modulators and inter-
change them.
Connect the front modulator 3P (Gray) and 2P
connectors to the rear modulator.
Connect the rear modulator 3P (Gray) and 2P
connectors t o the front modulator.
Perform the pre-start self-diagnosis, retrieve the
problem code and record it.
Is any problem code indicated?
7 blinks-Faulty front ABS modulator.
6 blinks-Faulty ABS control unit.
ANTI-LOCK BRAKE SYSTEM (ABS)
16-19