Honda INTERCEPTOR 2002 Service Manual page 60

FRAME/ BODY PANELS/ EXHAUST SYSTEM
Secure the bottom of right and left side cowl with
two trim clips.
Secure the both side cowls and inner ha lf cowl with
trim clips and pan screws, then tighten the pan
screws to the specified torque.
TORQUE: 2 N·m (0.15 kgf·m, 1.1 lbf·ft)
Insta ll the left meter panel aligning its tabs with the
slots in the center meter panel.
While aligning the pin behind t he left m eter panel
with the grommet on the upper cowl, install the left
meter panel.
Install t he pan screws and trim clips.
Tighten the side cowl screws an d both meter panel
screws.
Tighten t he pan screws to the specified torque.
TORQUE: 2 N·m (0. 15 kgf·m, 1.1 lbf·ft)
TR IM CLIPS
TRIM CLIPS
LEFT METER PANEL
GROMMET
BOSS
TRIM CLIP
LEFT METER PANEL
SCREWS
2-11