Honda INTERCEPTOR 2002 Service Manual page 329

CLUTCH
Remove the bolts and clutch slave cylinder assem-
bly.
Remove the gasket and dowel pins.
DISASSEMBLY
Remove the slave cylinder piston and spring.
If the piston is hard to remove, remove the fo llow-
ing:
Place a shop t owel over the piston to cushion the
piston when it is expelled, and posit ion t he cyli nder
with the piston down.
Do not use high
Apply small squ irts of air pressure to the f luid inlet
pressure air or bring
to remove the piston.
the nozzle to close
to the inlet.
9-12
INSPECTION
Check the piston spring for weakness or damage.
Inspect the oil and piston seals for damage or dete-
rioration.
Replace the oil seal and piston seal if necessary.
Clean the seal grooves with clean brake fluid.
Check the slave cylinder for scori ng or other dam-
age.
Check the slave cylinder piston for scratches, scor-
ing or other damage.
PISTON SEAL
/4
SPRING
OIL SEAL
SLAVE CYLINDER BODY
PISTON
(/