Honda INTERCEPTOR 2002 Service Manual page 325

CLUTCH
9-8
DISASSEMBLY
Remove the pivot bolt/nut and clutch lever assem- CLUTCH SWITCH
bly.
Remove the screw and clutch switch.
Remove the boot and push rod.
Remove the snap ring from the master cylinder
body using the special tool as shown.
TOOL:
Snap ring pliers
07914-SA50001
Remove the master piston assembly and spring.
Clean the inside of the cylinder and reservoir with
brake fluid.
SCREW
PISTON ASSEMBLY
PIVOT BOLT
PIVOT NUT
S NAP RING
SPRING