Honda INTERCEPTOR 2002 Service Manual page 494

Keep the piston,
Coat all parts w ith clean brake fluid before assem-
cups, spring, snap
bly.
rmg and boot as a
set; do not substi-
tute individual
parts.
When installing the
Dip the piston in brake flu id .
cups, do notal/ow
Install the spring into the piston.
the lips to rum
Install the piston assembly into the mast er cylinder.
inside out.
Be certain the snap
Install the snap ring using the special tool.
ring is firmly seated
in the groove.
TOOL:
Snap ring pliers 07914-SA50001
Install the boot.
Install the brake hose eyelets w ith the oil bolts and
new sealing washers.
T ight en the oil bolts to t he specified torque.
TORQUE: 34 N·m (3.5 kgf·m, 25 lbf.ft}
Install the left front brake caliper (page 15-41 }.
Fill and bleed the air f rom lever and pedal brake line
(page 15-7}.
MASTER CYLINDER
HYDRAULIC BRAKE
t
MASTER PISTON
,,
~ ~
t
MASTER PISTON
7!
SPRING
~
PUSH ROD ASSEMBLY
15-27