Honda INTERCEPTOR 2002 Service Manual page 276

Suspend the cam
chain with a piece
of wire to prevent
the chain from fall-
ing into the crank-
case.
This tool can easily be made from a thin (1 mm
thickness) piece of steel.
Remove the bolts and cam chain guide B.
Remove the cam sprocket from the camshaft.
Loosen and remove the camshaft holder 8 bolts
gradually in several steps and remove the camshaft
holder B.
Loosen the camshaft holder A bolts and then
remove the camshaft holder A.
NOTICE
I
From outside to inside, loosen the bolts in a criss-
cross pattern in several steps or the camshaft holder
might break.
Do not forcib ly remove the dowel pins from the
camshaft holder.
Remove the joint collars and 0-rings from the front
cylinder head.
Remove the front cylinder camshafts.
CYLINDER HEAD/ VALVES
15 mm 19mm
15 mm
!s.5
mm
MATERIAL TH ICKNESS: 1.0 mm
8-13