Honda INTERCEPTOR 2002 Service Manual page 302

Apply molybdenum oil solution to the camshaft
journals of the cylinder head and camshaft holder.
Install the rear cylinder intake and exhaust cam-
shafts (page 8-42).
Turn the crankshaft clockwise 1-1/ 4 turn (450°) and
align the "4T" mark on t he ignition pulse generator
rotor with the index mark on t he right crankcase
cover.
Make sure that the No.4 piston is at TDC (Top Dead
Center) on the compression stroke.
Apply molybdenum oil solution to the camshaft
journals of the cylinder head and camshaft holder.
Make sure the
Install the front cylinder intake and exhaust cam-
index lines on the
shafts with the index lines on the cam sprocket fac-
cam sprockets are
ing outward.
facing ourward and
Install the cam chain onto the cam sprockets.
are flush with rhe
cylinder head.
Always replace the
Install the joint coll ars and new 0-rings i nto the cyl-
0-nngs w1th new
inder head.
ones.
CYLINDER HEAD/ VALVES
8-39