Honda INTERCEPTOR 2002 Service Manual page 82

FRAME/BODY PANELS/EXHAUST SYSTEM
Tighten the front exhaust pipe flange nut to t he
specified torque.
TORQUE: 2 1 N ·m (2.1 kgf·m, 15 lbf·ft)
Install the muffler heat guard/right footpeg holder
assembly onto the frame, install and tighten the
footpeg mounting bolts and heat guard mounting
bolt.
Route the
02
sensor wires into the f rame .
Connect the 0 2 sensor 4P (Natural) and 4P (Black)
connectors.
MUFFLER INSTALL TION
Insta ll t he new gasket onto the muffler joint.
Insta ll the muffler int o the fro nt exhaust pipe.
Insta ll the muffler mounting socket bolts and nuts.
Hold t he socket bolts and tighten the nuts securely.
MUFFLER MOUNTING SOCKET BOLT/NUT
2-33