Honda INTERCEPTOR 2002 Service Manual page 566

BATTERY / CHARGING SYSTEM
Install the dowel pins and new gasket.
Install the alternator cover.
The alternator cover
!stator} is magneti-
cally attached
to
the
flywheel. be care-
ful during installa-
tion.
Install the w ire clamp and bolts, then tighten the SH
r-a.Mo.~R'\
bolts.
Route the alternator wire into the frame, connect the
alternator 3P (Natural) connector.
Add recommended oil up to the proper level (page
3-14).
Install the following:
- Throttle body (page 5-67)
- Radiator reserve tank (page 6-17)
- Side cowl (page 2-10)
REGULATOR/RECTIFIER
SYSTEM INSPECTION
Remove the side cowl (page 2-8).
Disconnect the regulator/rectifier connectors, and
check it for loose contact or corroded terminals.
17-13