Honda INTERCEPTOR 2002 Service Manual page 488

DISASSEMBLY
Remove the pivot bolt/nut and brake lever assem-
bly.
Remove the screw and brake light switch.
Remove the boot.
Remove the snap ring fro m the master cylinder
body using the special tool as shown.
TOOL:
Snap ring pliers 07914-SA50001
I
BRAKE LEVER
SCREW
Remove the master piston, primary cup and spring. MASTER CYLINDER
Clean the inside of the cylinder and reservoir with
brake fluid.
HYDRAULIC BRAKE
PIVOT BOLT
PIVOT NUT
BRAKE LIGHT SWITCH
SNAP RING
PRIMARY CUP
15-21