Brake Light Switch - Honda INTERCEPTOR 2002 Service Manual

MAINTENANCE
Firmly apply the brake lever or pedal, and check that
no air has entered the system.
If the lever or pedal feels soft or spongy when oper-
ated, bleed the air from the system.
Inspect the brake hose and fittings for deterioration,
cracks and signs of leakage.
Tighten any loose fittings.
Replace hoses and fittings as required.
Refer the procedure for brake bleeding (page 15-7).
BRAKE LEVER ADJUSTMENT
Altgn the arrow on
The distance between the top of the brake lever and
the brake teverw1th
the grip can be adjusted by turning the adjuster.
the index notch on
the adjuster.
BRAKE PEDAL HEIGHT ADJUSTMENT
Loosen the lock nut and turn the push rod until the
correct pedal height is obtained.
BRAKE LIGHT SWITCH
The front brake Adjust the brake light switch so that the brake light
hghr sw1Tch does
comes on just prior to the brake actually being
nor requlfe adJUST-
engaged.
3-28
ment.
If the light fails to come on, adjust the switch so that
the light comes on at the proper time.
Hold the switch body and turn the adjuster. Do not
turn the switch body.
ADJUSTER