Honda INTERCEPTOR 2002 Service Manual page 448

Install the bearing holder into the swingarm.
Install the rear brake caliper stay onto the bearing
holder, secure it with a snap ring.
Install t he shim, collar and rubber onto the brake
torq ue rod.
Install and tighten the new bo lt s to the specified
torque.
TORQUE: 34 N ·m (3 .5 kgf·m, 25 lbf.ft)
REAR WHEEU SUSPENSION
SNAP RING
CALIPER STAY
-·-
TORQU E ROD
I
COLLAR
RU BBER
14-19