Honda INTERCEPTOR 2002 Service Manual page 209

FUEL SYSTEM (Programmed Fuel Injection)
5-74
Install the starter valve assembly into the valve hole.
Tighten the starter valve lock nut to the specified
torque.
TORQUE: 2 N·m (0. 18 kgf·m, 1.3 lbf.ft)
Turn the starter valve screw until it seats lightly,
then back it out as noted during removal.
Install the collars and starter valve link arm shaft.
Install the starter valve synchronization plate to the
starter valve arm shaft and tighten the screws to the
specified torque.
TORQUE: 1 N·m (0.09 kgf·m, 0.7 lbf.ft)