Honda INTERCEPTOR 2002 Service Manual page 174

FUEL SYSTEM {Programmed Fuel Injection)
Turn the ignition switch ON and warm up the
engine up to coolant temperature is 80
o c
(176
OF).
Operate the throttle grip and snap the engine
speed from idle to 5,000 rpm.
Check the voltage between the test harness t er-
minals.
Connection: A19
(+)-
816 (-)
Standard:
With the throttle open:
0.6 V minimum
With the throttle quickly closed:
0.4 V minimum
Is the voltage within the standard values?
NO - Faulty No.1 02 sensor.
YES - Check the fuel supply system, if the sys-
tem is correct, replace t he ECM with a
new one, and inspect it again.
PGM-FI MIL 22 BLINKS (No.2
0 2
SENSOR)
1. No.2 0 2 Sensor Signal Line Inspection
::cr:LlC
illttlf!'tlts
EB 8
Turn the ignition switch OFF. No.2
o
2
SENSOR 4P (BLACK) CONNECTOR
Disconnect the No.2 0 2 sensor 4P (Black) con-
nector.
Check for loose or poor contact on the
0 2
sensor No.2
0
2
SENSOR 4P (BLACK) CONNECTOR
4P (Black) connector.
5-39