Spark Plug - Honda INTERCEPTOR 2002 Service Manual

Remove and discard the air cleaner element in
accordance w ith the maintenance schedu le (page 3-
4).
A lso replace t he air cleaner element any t ime it is
excessively dirty or damage.
Install the removed parts in the reverse order of
removal.
SPARK PLUG
REMOVAL
Clean around the
spark plug bases
w1th compressed
air before remov-
ing, and be sure
that no debris is
allowed to enter the
combustion cham-
ber.
Front cylinder:
Remove the side cowls (page 2-8).
Disconnect the direct ign ition coi l connectors.
Remove the bolts and direct ignition coils from the
spark p lug .
Rear cylinder:
Open and support the fuel tank using the equipped
tools (page 3-5).
Clean around the
Disconnect the direct ignition coil connectors.
spark plug bases
Remove the bolts and direct ig nition coils from the
with compressed
spark p lug.
a1r before remov-
mg, and be sure
that no debris is
allowed to enter the
combustion cham-
ber.
Front and rear cylinder:
Remove the spark plugs using the equipped spark
plug wrench or an equivalent.
Inspect or replace as described in the maintenance
schedule (page 3-4).
MAINTENANCE
SPARK PLUG WRENCH
3-7