Pair Solenoid Valve - Honda INTERCEPTOR 2002 Service Manual

FUEL SYSTEM {Programmed Fuel Injection)
VACUUM CHAM BER
Removal/Installation
Remove the air cleaner housing (pag e 5-60).
Disconnect the vacuum hose from the vacuum
chamber.
Remove the screw and vacuum chamber from the
air cleaner housing.
Inspection
Check the vacuum chamber for damage and
scratches, replace if necessary.
PAIR SOLENOID VALVE
REMOVAL/INSTALLATION
Disconnect the PAIR s
~ ' - noid
valve 2P (Natural)
connector.
Disconnect the PAIR air suction hoses.
Remove the PAIR solenoid valve from the air
cleaner housing.
Installation is in the reverse order of removal.
INSPECTION
Remove the PAIR solenoid valve.
Check that the air should not flow (A) to (B), only
when the 12 V battery is connected to the PAIR sole-
noid valve terminals.
VACUUM CHAMBER
(B) (B)
Check the resistance between the terminals of the
~=================~
PAIR solenoid valve.
STANDARD: 20 - 24
n
(20
octss
° F)
If t he resistance is out of specification, replace the
PAIR solenoid valve.
PAIR CONTROL SOLENOID VALVE
5-87