Honda INTERCEPTOR 2002 Service Manual page 486

Remove the pad pin and brake pads.
Clean the inside of the caliper especially around the
caliper pistons.
Make sure the new brake pad spring is i n p lace.
Push t he brake pads against the pad spring, then
install the pad pin.
Tighten the pad pin to the specified torque.
TORQUE: 18 N·m (1.8 kgf·m, 13 lbf·ft )
After the brake pad
Install the pad pin rubber plug.
replacement, check
the brake operation
by applying the
brake lever or
pedal.
HYDRAULIC BRAKE
15-19