Radiator Reserve Tank - Honda CBR650F Service Manual

dummyhead dummyhead
DISASSEMBLY/ASSEMBLY
Disassemble and assemble the radiator as following illustration.
Release the wire clip.
FAN MOTOR SHROUD
FAN MOTOR SHROUD BOLT
8.4 N·m (0.9 kgf·m, 6.2 lbf·ft)

RADIATOR RESERVE TANK

REMOVAL/INSTALLATION
Remove the exhaust pipe/muffler (page 2-18).
Remove the radiator reserve tank cap [1].
Remove the bolt [2] and release the boss [3] of the
reserve tank [4] from the frame.
Disconnect the siphon hose [5] and drain the coolant.
Remove the reserve tank by pulling the overflow hose
[6] out from the frame.
Installation is in the reverse order of removal.
TORQUE:
Radiator reserve tank mounting bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
Fill the reserve tank with the recommended coolant
(page 3-11).
RADIATOR
Align the cut outs.
FAN MOTOR NUT
5.1 N·m (0.5 kgf·m, 3.8 lbf·ft)
FAN MOTOR
COOLING FAN NUT
2.7 N·m (0.3 kgf·m, 2.0 lbf·ft)
COOLING FAN
[2]
[6]
COOLING SYSTEM
CBR650F/FA: CB650F/FA:
RADIATOR CAP
[5]
[1]
[3] [4]
8-9