Honda INTERCEPTOR 2002 Service Manual page 243

COOLING SYSTEM
6-16
Install the cooling fan onto the fan motor shaft by
aligning the flat surfaces.
Apply a locking agent to the cooling
f~~
nut threads.
Install and tighten the nut to the spec1f1ed torque.
TORQUE: 3 N·m (0.27 kgf·m, 2.0 lbf·ft)
Inst all t he cooling fan motor assembly onto the radi-
ator.
Rou te the ground eyelet properly.
Install and tighten the bolts.
Connect the fan motor switch connector.
Install the radiator grill while aligning the tabs to the
hooks on the radiator.
COOLING FUN
RADIATOR GRILL
HOOKS