Honda INTERCEPTOR 2002 Service Manual page 262

Install the following:
- Drive sprocket cover {page 10-10)
- Clutch slave cylinder (page 9-13)
- Vehicle speed sensor {page 20-4)
- Radiator reserve tank (page 6-17)
Cahforma type only:
Install the EVAP canister onto the bracket, then
install and tighten the socket bolts securely.
Install the EVAP purge control valve (page 5-88).
Install the fo llowing:
- Rear f ender (page 2-20)
Exhaust pipe/muffler (page 2-30)
Throttle body (page 5-67)
Fuel tank(page 5-58)
Rear cowl (page 2-7)
Side cowl (page 2-10)
Adjust the drive chain slack (page 3-19).
Pour recommended engine oil up to the proper level
(page 3-14)
Fill the cooling system with recommended coolant
and bleed the air (page 6-6).
ENGINE REMOVAL/INSTALLATION
EVAP CANISTER
BOLTS
7-15