Cam Pulse Generator - Honda INTERCEPTOR 2002 Service Manual

FUEL SYSTEM (Programmed Fuel Injection)
INSTALLATION
Always replace a
Install the new sealing washer and ECT sensor.
sealing washer with
T ighten the ECT sensor to the specified torque.
a new one.
TORQUE: 23 N·m (2.3 kgf·m, 17 lbf·ft)
Connect the ECT sensor connector.
Fill the cooling system with recommen ded coolant
{page 6-6).
CAM PULSE GENERATOR
REMOVAL
Remove the throttle body {page 5-63).
Disconnect the cam pu lse generator 2P (Natu ral )
connector.
Remove the bolt and cam pulse generator from the
rear cylinder head.
INSTALLATION
Install the new 0-ring onto the cam pulse generator.
Install the cam pulse generator into the cyl inder
head.
Install and tighten t he mounting bolt secu rely.
5-79