Honda INTERCEPTOR 2002 Service Manual page 485

HYDRAULIC BRAKE
Tighten the pad pin to the specified t orque.
TORQUE: 18 N ·m (1.8 kgf·m, 131bf.ft)
After the brake pad
Install the pad pin rubber plug.
replacement, check
the brake operation
by applying the
brake lever or
pedal.
Always replace the
REAR BRAKE PAD REPLACEMENT
brake pads in pairs
Check the brake fluid level in the brake master cylin-
to assure even disc
der reservoir as this operation causes t he level to
pressure.
rise.
15-18
Push the caliper pistons all the way in by pushing
the caliper body i nward to allow i nstallation of new
brake pads.
Remove the pad pin rubber pl ug.