Honda INTERCEPTOR 2002 Service Manual page 506

Left:
~
SJ.
32 N·m (3.3 k
CALIPER PIN BOOT
PAD RETAINER
~ ~
DUSTSEAL
Coat the new piston seals with clean brake fluid.
Coat the new dust seals with silicone grease.
Install the piston and dust seal into the groove of
the caliper body.
Coat the caliper pistons with clean brake fluid and
install them into the caliper cylinder with their open
ends toward the pad.
Install the caliper body B and tighten the new bolts
to the specified torque.
TORQUE: 32 N·m (3.3 kgf·m , 24 lbf·ft)
CALIPER PISTON
I
PISTON SEALS
~ s
~
DUST SEALS
HYDRAULIC BRAKE
CALIPER PISTONS
CALIPER BODY 8
15-39