Texas Instruments TMS320C6A816 Series Technical Reference Manual page 507

C6-integra dsp+arm processors
Table of Contents

Advertisement

www.ti.com
3.3.2.50.7 Receive Oversized Frames Register (RXOVERSIZED)
The total number of oversized frames received on the EMAC. An oversized frame is defined as having
all of the following:
Was any data or MAC control frame that matched a unicast, broadcast, or multicast address, or
matched due to promiscuous mode
Was greater than RXMAXLEN in bytes
Had no CRC error, alignment error, or code error
See
Section 3.2.5.5
statistic.
3.3.2.50.8 Receive Jabber Frames Register (RXJABBER)
The total number of jabber frames received on the EMAC. A jabber frame is defined as having all of the
following:
Was any data or MAC control frame that matched a unicast, broadcast, or multicast address, or
matched due to promiscuous mode
Was greater than RXMAXLEN bytes long
Had a CRC error, alignment error, or code error
See
Section 3.2.5.5
statistic.
3.3.2.50.9 Receive Undersized Frames Register (RXUNDERSIZED)
The total number of undersized frames received on the EMAC. An undersized frame is defined as
having all of the following:
Was any data frame that matched a unicast, broadcast, or multicast address, or matched due to
promiscuous mode
Was less than 64 bytes long
Had no CRC error, alignment error, or code error
See
Section 3.2.5.5
statistic.
3.3.2.50.10 Receive Frame Fragments Register (RXFRAGMENTS)
The total number of frame fragments received on the EMAC. A frame fragment is defined as having all
of the following:
Any data frame (address matching does not matter)
Was less than 64 bytes long
Had a CRC error, alignment error, or code error
Was not the result of a collision caused by half duplex, collision based flow control
See
Section 3.2.5.5
statistic.
SPRUGX9 – 15 April 2011
Submit Documentation Feedback
Preliminary
for definitions of alignment, code, and CRC errors. Overruns have no effect on this
for definitions of alignment, code, and CRC errors. Overruns have no effect on this
for definitions of alignment, code, and CRC errors. Overruns have no effect on this
for definitions of alignment, code, and CRC errors. Overruns have no effect on this
© 2011, Texas Instruments Incorporated
Registers
507
EMAC/MDIO Module

Advertisement

Table of Contents
loading

Table of Contents