Advertisement
Parameters
Command Modes
Command
History
Usage
Information
Related
Commands
show ip ospf database router
c e s
Syntax
Parameters
Command Modes
Command
History
1048
|
Open Shortest Path First (OSPFv2 and OSPFv3)
process-id
Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
link-state-id
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends
on the LSA type, and it can be one of the following:
•
the network's IP address for Type 3 LSAs or Type 5 LSAs
•
the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs
•
the default destination (0.0.0.0) for Type 5 LSAs
adv-router
(OPTIONAL) Enter the keyword
ip-address
Advertising Router to display only the LSA information about that router.
EXEC
EXEC Privilege
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.1.1.1
If you are using Multi-Process OSPF, you must enter the Process ID to view information regarding a
specific OSPF process. If you do not enter the Process ID, only the first configured process is listed.
show ip ospf database
Display the router (type 1) LSA information.
show ip ospf process-id database router [link-state-id] [adv-router ip-address]
process-id
Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
link-state-id
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends
on the LSA type, and it can be one of the following:
•
the network's IP address for Type 3 LSAs or Type 5 LSAs
•
the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs
•
the default destination (0.0.0.0) for Type 5 LSAs
adv-router
(OPTIONAL) Enter the keywords
ip-address
information about that router.
EXEC
EXEC Privilege
Version 7.8.1.0
Version 7.6.1.0
adv-router
Introduced support of Multi-Process OSPF.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
Displays OSPF database information.
adv-router
Introduced support of Multi-Process OSPF.
Introduced on S-Series
followed by the IP address of an
ip-address to display only the LSA
Advertisement
