Advertisement
hello padding
e
Syntax
Parameters
Defaults
Command Modes
Usage
Information
Related
Commands
hostname dynamic
e
Syntax
Defaults
Command Modes
Usage
Information
Related
Commands
ignore-lsp-errors
e
Syntax
834
|
Intermediate System to Intermediate System (IS-IS)
Use to turn ON or OFF padding for LAN and point-to-point hello PDUs or to selectively turn padding
ON or OFF for LAN or point-to-point hello PDUs.
hello padding [multi-point | point-to-point]
To return to default, use no hello padding [multi-point | point-to-point].
multi-point
point-to-point
Both LAN and point-to-point hello PDUs are padded.
ROUTER ISIS
IS-IS hellos are padded to the full maximum transmission unit (MTU) size. Padding IS-IS Hellos
(IIHS) to the full MTU provides early error detection of large frame transmission problems or
mismatched MTUs on adjacent interfaces.
isis hello padding
Enables dynamic learning of hostnames from routers in the domain and allows the routers to advertise
the hostname in LSPs.
hostname dynamic
To disable this command, enter no hostname dynamic.
Enabled.
ROUTER ISIS
Use this command to build name-to-systemID mapping tables through the protocol. All show
commands that display systems also display the hostname.
clns host
Define a name-to-NSAP mapping.
Ignore LSPs with bad checksums instead of purging those LSPs.
ignore-lsp-errors
To return to the default values, enter no ignore-lsp-errors.
(OPTIONAL) Enter the keyword
PDUs.
(OPTIONAL) Enter the keyword
point-to-point PDUs.
Turn ON or OFF hello padding on an interface basis.
multi-point
to pad only LAN hello
point-to-point
to pad only
Advertisement
