Dell Force10 TeraScale E Series Reference Manual page 1282

aaa authorization config-commands
e
Syntax
Defaults
Command Modes
Command
History
Usage
Information
aaa authorization exec
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
1282 | Security
Set parameters that restrict (or permit) a user's access to EXEC level commands.
aaa authorization config-commands
Disable authorization checking for CONFIGURATION level commands using the command no aaa
authorization config-commands.
Enabled when you configure aaa authorization commands
CONFIGURATION
Version 7.5.1.0 Introduced for E-Series
By default, the command aaa authorization commands configures the system to check both
EXEC level and CONFIGURATION level commands. Use the command no aaa authorization
config-commands to enable only EXEC-level command checking.
Set parameters that restrict (or permit) a user's access to EXEC-level commands.
aaa authorization exec {name | default} {local || tacacs+ || if-authenticated || none}
Disable authorization checking for EXEC level commands using the command no aaa
authorization exec.
name
default
local
tacacs+
none
None
CONFIGURATION
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
Version 6.1.1.0 Added support for RADIUS
Define a name for the list of authorization methods.
Define the default list of authorization methods.
Use the authorization parameters on the system to perform authorization.
Use the TACACS+ protocol to perform authorization.
Enter this keyword to apply no authorization.